Configure your EasyWorship Playlist

Now that you have enabled your EasyWorship Controller, you will need to configure your slides using the Master Control.  If you still need to connect your EasyWorship Playlist, please refer to article Connect EasyWorship to Titler Live 5 here.

  1. Select the graphic within your Layers list that is connected to EasyWorship and Navigate to the EasyWorship tab in the Layer Properties panel.
  2. Your Presentations with slides should populate below the controls.  Choose Configure Slides or Right-click > Enter Config Mode to open the Slide Configuration panel at the bottom of the controller.Configure_slides.png
  3. Select the slide or multiple slides of the same type that will be connected to the same style of graphic layout in Titler Live 5.  
  4. Select your Slide Type from the dropdown menu for the type of information you want the graphic to portray.Slide_Type.png
  5. Select the Linked Graphic from the dropdown list of all the graphics currently listed in your Layers Panel.  (If you do not see the graphic you need listed, you will need to add it to your layers list from the Graphic Library.  Then you may need to reload the EasyWorship Controller tab by right-clicking > choose Reload.)  
  6. Press Escape or Exit Config Mode to save the Configuration.  You also have the option to Rest All Slides at any time in the Configure Slides Panel. Autolink_and_Play.png

A checkmark will now appear in the upper right corner of each slide that has been configured.  You can now click any of the configured slides to Play in the Program Monitor from your EasyWorship interface.  Please see House of Worship Slide Type Variations for a more detailed description of the different slide types available.

Back to the top


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request