Output graphics with SDI – Help Center

If you're licensed for a version of Titler Live other than Express, you can output graphics to supported SDI cards, which are listed below.

Important! Your SDI card or external device must have two or more SDI outputs and support key/fill output channels.

Note: SDI is not available in Titler Live Express.

Sections in this article:

Output graphics to SDI

In Titler Live's playout interface, click the Outputs menu, choose SDI, and select Blackmagic or AJA.

Note: The SDI menu appears only when Titler Live detects a compatible SDI card. If you have a compatible card and the card doesn't appear in the SDI menu, verify the SDI card's latest driver is installed on your computer.

After you select an SDI output, the Card Output Connections dialog opens, which looks similar to the following DeckLink example.
From the drop-down list of SDI channels next to the playlist, select the SDI output that you want to assign to the channel.
In Titler Live's playlist, click a graphic's Play button to broadcast the graphic to your SDI receivers.

The output from Titler Live displays in your SDI receivers.

As of this publishing, Titler Live 4 supports the following SDI cards from BlackMagic and AJA.

Supports Windows and Mac.

Drivers 10.9.12 or newer required.

Supported SDI devices:

Unsupported SDI devices:

Supports Windows only.

Supported SDI devices:

Unsupported SDI devices: